SEVCON Gen4 Size-8, 0.5 Gain

Highly configurable battery powered inverter. The Gen4 Size 8 is capable of operation up to 400VDC and up to 400 A rms phase current.

P/N: 634H83204

Contact Us For A Quote 

This product is currently out of stock and unavailable.

Description
Datasheet 3D Model Software Manual

Summary

  • Exceptional motor controller for PMSM
  • Advanced control & safety features that are highly configurable
  • 128 V to 400VDC, 200 Arms (continuous), 360 Arms (30sec)
  • 322x 322 x 107mm, 8.9kg
  • IP66

Introduction

An AC motor controller designed to meet the high performance requirements of on-road and off-road Electric (EV) and Hybrid Electric Vehicles (HEV).

A compact, rugged and cost effective design, the Gen4 Size 8 is well suited for EV OEMs, EV conversions and EV drive train system integrators. Its high voltage range, up to 400V DC, is well matched to the needs of the automotive and commercial transport markets. The same hardware platform handles both AC Induction and Permanent Magnet AC motor technologies.

Features

  • Advanced Field Oriented Control
  • AC Permanent Magnet Synchronous motor control, including salient, non-salient and BLDC motors
  • AC induction motor control
  • CAN communications bus allows for easy interconnection of controllers and devices such as Battery Management Systems, displays and VCUs
  • CANopen and J1939 protocols
  • Configurable as a vehicle control master or as a motor control slave
  • Integrated logic circuit, 12 V or 24V nominal
  • Up to 400 VDC supply voltage
  • Up to 100 kW peak power output
  • Up to 60 kW continuous power output
  • Includes an additional dedicated safety supervisory processor
  • Safety interlock pulsed enable signal
  • IP66 protection
  • Highly configurable

Integrated I/O

Gen4 includes a fully-integrated set of inputs and outputs (I/0) designed to handle a wide range of vehicle requirements. This eliminate the need for additional external I/O modules or vehicle controllers and connectors.

  • All I/O protected to 40V
  • 4 analogue inputs 0 – 10V
  • 4 digital inputs
  • 3 power supplies 0 – 10 V 100mA
  • 3 contactor/solenoid outputs max 2A
  • Motor temperature sensor input
  • Programmable 5 V to 10 V encoder supply
  • Motor encoders supported include Resolver, UVW hall effect sensors, Sin/Cos sensors and incremental AB encoders

Key Parameters

  • Operating voltage range 128 V to 400VDC
  • Output motor phase current:
    • 400 Arms (boost)
    • 360 Arms (30sec)
    • 300 Arms (2 min)
    • 200 Arms (continuous)
  • Water/Glycol cooling
  • Forced air or oil cooled options also available (output rating subject to change)
  • Safety:
    • Electrical safety to ISO 6494, IEC 60664 and UL840
    • Pulsed safety enable input
    • Pulsed status output
  • Environmental:
    • –40°C to +85°C operation
    • IP66 protection
    • ISO 16750
Additional information
Weight 8.9 kg
Dimensions 32.2 × 32.2 × 10.7 cm
Options

Controller Only, With Starter Kit

You may also like…

$552.00 ex. GST

Sevcon Gen4 Programming Cable. In addition a DVT software licence is required.

$50.00 ex. GST

The Sevcon DVT software is used to calibrate and configure Sevcon motor controllers. Used in conjunction with the IXXAT programming dongle.

Out of stock
$560.00 ex. GST

Clearview is a configurable CANopen colour display (3.5 inch, 320x240, 256 colour display) which can show information sent from the Sevcon motor controllers it is connected to. This product is discontinued