SEVCON HVLP 20

Highly configurable battery powered inverter designed to control ancillary pumps and fans. The HVLP is capable of operation up to 800VDC and 33A continuous.

$2,704.00 ex. GST

In stock

Datasheet Manual

Summary

  • Designed primarily for ancillary control of pumps and fans
  • Advanced control & safety features that are highly configurable
  • Operate at 200V to 800V DC
  • IP67
  • Air or liquid cooled options available

Introduction

A new range of low power AC motor controllers/inverters designed primarily for ancillary control of pumps and fans on hybrid and electric buses, agricultural implements, tractors and other high voltage vehicles. There are two models in the range, which cover both liquid cooled and air cooled designs.

Features

  • Advanced Field Oriented Control
  • AC Permanent Magnet Synchronous motor control, including salient, non-salient and BLDC motors
  • AC induction motor control without speed sensor
  • Operation without a position sensor for PMSM motors supported for custom applications
  • 200 V to 800 VDC battery voltage
  • Up to 53 A peak current (HVLP-20)
  • Up to 33 A continuous current (HVLP-20)
  • CAN communications bus allows for easy interconnection of controllers and devices such as Battery Management Systems, displays and VCUs
  • CANopen and J1939 protocols
  • Configurable as a vehicle control master (including pump and generator control) or as a motor control slave
  • High Voltage Interlock (HVIL)
  • 12 V or 24 V nominal supply
  • Highly configurable

Integrated I/O

HVLP includes a fully-integrated set of inputs and outputs (I/0) designed to handle a wide range of requirements. This reduces the need for additional external I/O modules or vehicle controllers and connectors.

  • All I/O protected to 40V
  • 4 analogue inputs 0 – 10V
  • 4 digital inputs
  • 2 power supplies 5 – 10V (100mA & 200mA)
  • 2 digital outputs
  • Motor temperature sensor input
  • Motor encoders supported include Resolver (programmable gain), UVW hall effect sensors, Sin/Cos sensors and incremental AB encoders

Key Parameters

HVLP-10 (air cooled)

  • Operating voltage range at full current: 200V to 800V
  • Output motor phase current:
    • 24A rms (1 min)
    • 19A rms (Continuous)
  • Ambient –40°C up to +45°C full operation
  • 255 x 223 x 95mm
  • Weight: 3.7 kg

HVLP-20 (liquid cooled)

  • Operating voltage range at full current: 200V to 800V
  • Output motor phase current:
    • 53A rms (1 min)
    • 33A rms (Continuous)
  • Water/Glycol coolant
    • Full operation up to 70°C inlet temperature and at 6/l min flow
  • 255 x 223 x 88mm
  • Weight: 2.3 kg (dry)

Common

  • Safety:
    • HVIL (High Voltage Interlock H/W & S/W)
    • Designed to meet the electrical isolation of electrically propelled vehicles ISO 6469
  • Environmental:
    • IP6k9k and IP67 protection
Weight 2.6 kg
Dimensions 25 × 22 × 10 cm

Need assistance with this product?

Complete our online enquiry form and we will get back to you as soon as possible.