SEVCON Gen4 Size-10 Sin Cos

Highly configurable battery powered inverter. The Gen4 Size 10 is capable of operation up to 800VDC and up to 450 A rms phase current.

P/N: 634E74201

Lead times apply

$14,900.00$15,500.00 ex. GST

Clear
Description
Datasheet

Summary

  • Exceptional motor controller for PMSM
  • Advanced control & safety features that are highly configurable
  • 50 V to 800VDC, 200 Arms (continuous), 400 Arms (2min)
  • 511x 266 x 85mm, 10.9kg
  • Water/Glycol Cooled

Introduction

An AC motor controller designed to meet the high performance requirements of on-road and off-road Electric (EV) and Hybrid Electric Vehicles (HEV).

The Gen4 Size 10 is capable of operation up to 800VDC and up to 450 A rms phase current.

Features

  • Advanced Field Oriented Control
  • AC Permanent Magnet Synchronous motor control, including salient, non-salient and BLDC motors
  • AC induction motor control
  • CAN communications bus allows for easy interconnection of controllers and devices such as Battery Management Systems, displays and VCUs
  • CANopen and J1939 protocols
  • Configurable as a vehicle control master or as a motor control slave
  • Integrated logic circuit, 12 V or 24V nominal
  • Up to 800 VDC supply voltage
  • Up to 300 kW peak power output
  • Up to 150 kW continuous power output
  • Includes an additional dedicated safety supervisory processor
  • Safety interlock pulsed enable signal
  • Highly configurable

Integrated I/O

Gen4 Size 10 includes a fully-integrated set of inputs and outputs (I/0) designed to handle a wide range of vehicle requirements. This eliminated the need for additional external I/O modules or vehicle controllers
and connectors.

  • All I/O protected to 40V
  • 4 analogue inputs 0 – 10V
  • 4 digital inputs
  • 3 power supplies 0 – 10 V 100mA
  • 3 contactor/solenoid outputs max 2A
  • Motor temperature sensor input
  • Programmable 5 V to 10 V encoder supply
  • Motor encoders supported include Resolver, UVW hall effect sensors, Sin/Cos sensors and incremental AB encoders

Key Parameters

  • Operating voltage range at full current 50 V to 800V
  • Output motor phase current:
    • 400A rms (2 min)
    • 200 A rms (Continuous)
  • Water/Glycol coolant (oil cooling available for custom applications)
  • Weight: 10.9 kg
Additional information
Weight 10.9 kg
Dimensions 51.1 × 26.6 × 8.5 cm
Options

Controller Only, With Starter Kit

You may also like…

$552.00 ex. GST

Sevcon Gen4 Programming Cable. In addition a DVT software licence is required.

$87.00 ex. GST

Water Pump specifically designed for Cooling EV Motors, Controllers and Chargers.

$50.00 ex. GST

The Sevcon DVT software is used to calibrate and configure Sevcon motor controllers. Used in conjunction with the IXXAT programming dongle.